Key Figures of the Oerlikon Group as of March 31, 2020 (in CHF million)
ROCE (rolling 12-month)
Pfäffikon, Schwyz, Switzerland – May 5, 2020 – “The COVID-19 pandemic has created unprecedented effects on the global economy, business and the lives of billions of people,” said Dr. Roland Fischer, CEO Oerlikon Group. “Like many other companies, we saw initial impacts in the first-quarter results and are implementing mitigating measures to protect our liquidity while ensuring business continuity. We remain very disciplined in our investments and have a strong financial position to navigate Oerlikon through these extraordinary times.”
“Since the beginning, ensuring the safety and well-being of our employees, customers and suppliers has been our utmost priority,” added Dr. Fischer. “In these uncertain times, our businesses have been experiencing dynamically evolving business conditions. China has shown signs of overcoming the virus, in particular in our manmade fibers business, while we faced increasing challenges from the global impact in our Surface Solutions Segment toward the end of the first quarter in Europe and in the USA.”
“Our manmade fibers business continues to be very well positioned, driven by long-term, strategic customer investments in the filament value chain in China. As a result of the COVID-19 pandemic, we are seeing strong global demand for our meltblown technology that is used to produce surgical face masks. To support this demand that is expected to further grow, we have ramped up our production capacity and significantly reduced delivery times of these systems. In addition to selling our equipment globally, we are supporting local and international businesses with nonwoven materials. For example, we are now producing in Germany more than 100 000 m2 of fabrics per month for the manufacture of over one million face masks each month to protect lives,” supplemented Dr. Fischer.
“As we cannot predict the duration and scope of the spread of the virus, we are withdrawing our guidance for 2020. Our focus remains on executing the measures to protect our business and stakeholders in the near term, while preparing for the return to normalcy and remaining committed to our mid-term ambitions,” concluded Dr. Fischer.
Q1 Results Impacted by COVID-19 Pandemic
The scale of the COVID-19 outbreak resulted in the World Health Organization’s declaration of the virus as a pandemic on March 11, 2020. Since then, the crisis has affected every facet of corporate, social and daily lives worldwide in unprecedented ways. With production and business shutdowns in a large number of countries, the crisis has severely impacted many industries, resulting in the postponement of and declines in investments in equipment and services.
In this highly challenging environment, Group orders for the first quarter decreased by 29.9% to CHF 477 million, particularly in Asia and Europe. Group sales were 15.2% lower at CHF 529 million, attributed to lower sales across all regions and adverse currency movements. At constant exchange rates, Group sales were CHF 558 million.
Group EBITDA was at CHF 58 million, corresponding to a margin of 11.0%. EBIT for Q1 2020 was at CHF 6 million, or 1.1% of sales. The first-quarter performance resulted in a rolling 12-month Oerlikon Group ROCE of 5.4%. In the first quarter of 2020, Oerlikon generated 42.0% of total Group sales (Q1 2019: 40.4%) from services.
Strong Mitigating Measures to Protect Liquidity and Business Continuity
In February, Oerlikon proactively started implementing an action plan to mitigate the impact of the pandemic. The action plan focuses on preserving the liquidity of the company, while ensuring that its businesses continue to operate and customers’ needs are met.
Oerlikon has reinforced its strong cash position by proactively drawing down its revolving credit facilities. As of March 31, 2020, the Group has a cash balance of CHF 1.0 billion and a net cash position of CHF 219 million. The strong cash position will enable Oerlikon to manage any potential liquidity challenges.
The Group will be very selective in deciding on investments to be made in 2020, in line with the target to reduce capital expenditure (CAPEX) and discretionary spend by at least CHF 100 million in total compared to 2019.
As already announced, Oerlikon is executing a productivity program, primarily aimed at reducing structural cost in its Surface Solutions Segment. Across geographies and through a number of current and planned initiatives, Oerlikon is reducing a total headcount in the surface solutions business of approximately 800 employees, or around 10% of the Surface Solutions Segment’s headcount. As previously disclosed, Oerlikon is expecting to invest CHF 25 million to CHF 35 million in the implementation of the entire program, predominantly for severance costs.
Oerlikon Withdraws 2020 Outlook. Remains Committed to Mid-Term EBITDA Margin Target
The global economy and industries are expecting to face significant challenges in the upcoming quarters due to the COVID-19 pandemic. In particular, the end markets of the Surface Solutions Segment are expected to be impacted globally. Following the easing of restrictions in China, production and operations in the Manmade Fibers Segment have been running at full capacity, and the segment is confident of being able to fulfil its delivery schedules for 2020. In view of the high degree of uncertainty as to the scope and duration of the crisis, Oerlikon is withdrawing its guidance for 2020. Oerlikon remains committed to delivering on its mid-term target for the EBITDA margin of 16%-18%.
Surface Solutions Segment
Key Figures of the Surface Solutions Segment as of March 31, 2020 (in CHF million)
Sales (to third parties)
The Surface Solutions Segment faced a slowdown in all of its end markets and across all regions. Order intake declined by 13.5% year-over-year to CHF 333 million and sales decreased by 12.4% to CHF 325 million. The decline in orders and sales was most noticeable in the tooling, automotive and general industries, particularly in March.
The weakness in the automotive sector was exacerbated by the pandemic. The shutdown in China impacted supply chains in Europe and Asia. Since the return to work at the beginning of the second quarter in China, a healthy ramp up in productions has been noted. In Europe and the USA, the shutdowns toward the end of the first quarter has started impacting the nitriding and thin-film service businesses.
The aviation industry is facing an unprecedented global standstill of civil aviation activities, which is impacting the demand for materials and equipment for the manufacturing of new aircraft and for maintenance, repairs and overhauls (MRO). General industries and tooling are exposed to global shutdowns, with some exceptions, such as in the critical and essential medical and food businesses.
During this crisis, the operations of the global coating center network have been subjected to local governmental regulations and industry exposures. In China, all 13 sites were closed in February; during March, the majority of sites were operational, and all sites have been back in full operation since the end of that month. A total of 25 out of 166 surface solutions sites had to be closed temporarily upon requests by the government in countries including Spain, Italy, India, Malaysia and Mexico. The segment was successful in obtaining exemptions, including in the USA, as it supports relevant customers and vital applications. Depending on the industry exposure and volatility, affected sites were operating at 50% to100% capacity.
The EBITDA margin for the first quarter was 12.0%, attributed to the lower sales and product and regional mix. EBIT for Q1 2020 was CHF -5 million (Q1 2019: CHF 19 million) and the EBIT margin was -1.4% (Q1 2019: 5.2 %). To mitigate the impact of the COVID-19 pandemic, further cost-saving measures such as short-time work and the reduction of vacation and overtime accruals have been implemented. Between 20% to 25% of the workforce are currently in short-time work, preparing to go into short-time work or are on paid leave as requested by the respective local governments. Aggressive cost-cutting targets have been set for the segment and will be executed with the productivity program. The goal is to increase the efficiency and agility of the segment to navigate the potential impacts of the crisis and to make the segment fitter for the future.
Manmade Fibers Segment
Key Figures of the Manmade Fibers Segment as of March 31, 2020 (in CHF million)
Sales (to third parties)
The segment received new large contracts for filament spinning systems from three of the world’s leading manmade fibers manufacturers in China. The three projects have a total value of more than CHF 600 million. A very small proportion of these projects will be recognized in order intake in 2020, and the majority will be accounted for in 2021 and 2022. Despite the new contracts, the segment noted a decline of 51.4% to CHF 144 million in order intake, partly due to the delay in financial clearance in China as a result of the shutdowns.
Sales for the segment decreased by 19.3% to CHF 205 million, attributed to the lockdown in China and to lower demand for equipment and systems for special filament (carpet and industrial yarn) and plant engineering (polymerization, staple fibers and nonwovens), particularly in North America, Europe and Asia. Following lower sales, the EBITDA margin declined to 8.9%. EBIT for Q1 2020 was CHF 11 million (Q1 2019: CHF 27 million) and the EBIT margin was 5.5% (Q1 2019: 10.7%).
In the first quarter, the segment took over the majority stake in Teknoweb Materials s.r.l., which was established in 2017 as a joint venture to extend the nonwoven production system portfolio to include the attractive market for disposable nonwovens. Due to the COVID-19 pandemic, a strong global demand for Oerlikon’s meltblown (nonwoven) technology used to produce surgical face masks has been noted. This demand is expected to grow in the upcoming quarters, driven by government regulations and the need for greater self-sufficiency and reduced reliance on imports for critical medical items. To support this growth, production capacity for the meltblown technology has been ramped up and the delivery times of these systems significantly reduced.
Production in China was closed toward the end of January and in February (extended Chinese New Year and lockdowns). Operations started up gradually in March and have returned to full capacity since the end of that month. Despite the shutdowns in Europe, the segment operated at full speed in Germany, achieving a record production of winders in March in Remscheid, Germany. The key challenge in Europe has been to secure the supply chain in the challenging COVID-19 environment. The segment has succeeded in balancing the situation and is confident of being able to fulfil the planned delivery schedules for 2020. The mid-term outlook for the segment remains unchanged based on current assessment and the project pipeline has been extended, with deliveries reaching into 2023.
Oerlikon will present its results in English during its conference call today beginning at 14:00 hrs CEST. To participate, please dial the following numbers a few minutes before the start of the conference call:
Local toll call numbers
+41 (0) 58 310 50 00
+44 (0) 207 107 06 13
+1 (631) 570 56 13
The accompanying presentation can be viewed simultaneously by clicking here.
Please find the media release including a full set of tables at www.oerlikon.com/pressreleases and www.oerlikon.com/ir.
Oerlikon (SIX: OERL) engineers materials, equipment and surfaces and provides expert services to enable customers to have high-performance products and systems with extended lifespans. Drawing on its key technological competencies and strong financial foundation, the Group is sustaining mid-term growth by addressing attractive growth markets, securing structural growth and expanding through targeted mergers and acquisitions. A leading global technology and engineering Group, Oerlikon operates its business in two Segments – Surface Solutions and Manmade Fibers – and has a global footprint of more than 11 100 employees at 182 locations in 37 countries. In 2019, Oerlikon generated CHF 2.6 billion in sales and invested more than CHF 120 million in R&D.
For further information, please contact:
Head of Group Communications,
Investor Relations & Marketing
Tel: +41 58 360 96 22
Head of Group External Communications
& Public Affairs
Tel: +41 58 360 96 14
OC Oerlikon Corporation AG, Pfäffikon together with its affiliates, hereinafter referred to as “Oerlikon”, has made great efforts to include accurate and up-to-date information in this document. However, Oerlikon makes no representation or warranties, expressed or implied, as to the truth, accuracy or completeness of the information provided in this document. Neither Oerlikon nor any of its directors, officers, employees or advisors, nor any other person connected or otherwise associated with Oerlikon, shall have any liability whatsoever for loss howsoever arising, directly or indirectly, from any use of this document.
The contents of this document, including all statements made therein, are based on estimates, assumptions and other information currently available to the management of Oerlikon. This document contains certain statements related to the future business and financial performance or future events involving Oerlikon that may constitute forward-looking statements. The forward-looking statements contained herein could be substantially impacted by risks, influences and other factors, many of which are not foreseeable at present and/or are beyond Oerlikon’s control, so that the actual results, including Oerlikon’s financial results and operational results, may vary materially from and differ from those, expressly or implicitly, provided in the forward-looking statements, be they anticipated, expected or projected. Oerlikon does not give any assurance, representation or warranty, expressed or implied, that such forward-looking statements will be realized. Oerlikon is under no obligation to, and explicitly disclaims any obligation to, update or otherwise review its forward-looking statements, whether as a result of new information, future events or otherwise.
This document, including any and all information contained therein, is not intended as, and may not be construed as, an offer or solicitation by Oerlikon for the purchase or disposal of, trading or any transaction in any Oerlikon securities. Investors must not rely on this information for investment decisions and are solely responsible for forming their own investment decisions.