SAFEGUARDS | HardgoodsNO. 023/20
The JORF application notice relating to the application of decree n°95-949, relating to the prevention of risks resulting from the use of bunk beds intended for use in domestic or contract environments, has been published.
This application notice refers to the updated version for “Mezzanine” beds (fixed-base mezzanine beds located more than 600 mm from the ground with a base width greater than 120 cm and a base length greater than 150 cm) NF D 62 100-1 :2019 and NF D 62100-2:2019. The standard reference for bunk beds and high beds (internal length greater than 140 cm and a maximum bed base width of 120 cm) remain the same – EN 747-1+A1:2015 / EN 747-2+A1:2015.
Modifications related to NF D 62 100-1 :2019 and NF D 62100-2:2019, compared to the previous version from 2010, will have an impact on products. The main modifications are:
- Most of the wording has been reviewed and homogenized with the EN 747 wording
- The scope now includes beds with a bed base height of more than 600 mm, compared to 800 mm in the previous version
- The requirement about “May harm the user” has been clarified
- The finger entrapment requirement is now based on CEN/TR 13387 and product accessibility product has been defined
- If the product is fixed to the wall, stability and strength testing have to be performed, taking into account how it will be used
- Creation of a requirement concerning the means of access by a platform
- Most of the requirements have been aligned with EN 747
Don’t forget, the publication of the “brush decree”, n°2019-1007 published on September 30, 2019 harmonizing the regulatory provisions relating to the safety of certain non-food products, modifies administratively decree n°95-949.
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.
The products designed in the references were published in the JORF by the notice of September 19, 2015, which can be put on the market within one year from the publication of this notice and marketed when stock lasts.
For enquiries, please contact:
International Furniture Technical and BD Manager
T: +33 6 20 09 86 14
Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!
Read more articles for the Consumer Goods and Retail Industry
© SGS Group Management SA - 2020 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’ prior written consent.